37
CMV1
English
Owner’s manual
2-2. Press the [ENTER] button.
3-1. Turn the [UP/DOWN] knob to select “On” or
“Off”.
3-2. Press the [ENTER] button.
3-3. When you set “On”, turn the [UP/DOWN]
knob to select as following order
LOW ↔ MID ↔ HIGH
3-4. Press the [ENTER] button to store the
setting.
3-5. Press the [RETURN] button to return to the
previous mode.
Notes:
• Manufactured under license from BBE Sound,
Inc.
• Licensed by BBE Sound, Inc. under one or more
of the following US patents: 5510752, 5736897.
BBE and BBE symbol are registered trademarks
of BBE Sound, Inc.
• During audio adjustment mode, if no operation is
performed for more than 10 seconds, this mode
can be cancelled and return to previous mode.
General Settings
● Setting the clock
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
boat’s battery or take out this unit, the clock is
reset. While setting the clock, if another button or
operation is selected, the clock set mode is
canceled.
● Adjusting the Dimmer, Bright, Color,
Contrast, and Hue level
Note:
• The Bright, Color, Contrast, and Hue settings can
be adjusted only when a video image is displayed
on the screen.
• And the Hue setting can be adjusted only the video
system is set to “NTSC”.
[DIMMER]:
Adjusts the panel b rightness when the boat
lights are ON or OFF.
[BRIGHT]:
Adjusts the brightness of the display.
[COLOR]:
Adjusts the color saturation.
[HUE]:
Adjusts the tone of color (red is emphasized
or green is emphasized).
● Setting the screen size
You can change the screen size to suit to the
playback film.
* The setting in memory for each mode is
diferent.
* The factory default setting is “F.WIDE”.
To change adjustment setting
1. Press the [ADJUST] button to switch to
the adjustment selection display.
2. Turn the [UP/DOWN] knob to select the
“item name”.
“Clock” ↔ “Monitor” ↔ “Screen Size” ↔
“NTSC/PAL” ↔ “Tel-Speaker” ↔ “Tel-
Switch” ↔ “Title Scroll” ↔ “System
Check” ↔ “Initialize” ↔ “DivX
Resistration Code” ↔ “DivX URL”
* In the case of item names appearing with
the “
t” suffix after the item name, please
press the [ENTER] button to display the
setting value.
* The “Screen Size” can be set only in the
DVD/DivX/AUX/iPod video mode.
3. Turn the [UP/DOWN] knob to select the
“desired setting value”.
4. Press the [ENTER] button to confirm the
setting.
5. After completing settings, press the
[RETURN] button to return to the previous
mode.
2-1. Select “Clock”.
3-1. Press the [ENTER] button.
3-2. Press the [X] or [V] button to select the
hour, the minute or the clock format.
3-3. Turn the [UP/DOWN] knob to set the correct
time.
4-1. Press the [ENTER] button to store the time
into memory.
2-1. Select “Monitor”.
3-1. Press the [ENTER] button.
3-2. Press the [X] or [V] button to select
“DIMMER”, “BRIGHT”, “COLOR” or “HUE”.
3-3. Turn the [UP/DOWN] knob to adjust the
level.
Audio Settings
280PE3161BA_EN.book Page 37 Thursday, March 12, 2009 1:12 PM
To Next Page
Loading...
