12
MAX973HD
English
Owner’s manual
Turning the Power ON/OFF
Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
Turning the power on
1. Start the engine. The illuminations on this unit
light up and the power is automatically turned
on.
Note:
• The power will be turned on even when the ignition
switch is set to ACC ON position.
● When the following Caution screen is
displayed
Touch the [OK] key. The system will resume the
last status when the power was turned off.
● When the following User Profile
screen is displayed
Touch your Profile key. The system will resume
the last status when the power was turned off.
• This screen is displayed when the “Select on
Opening” item is set to “ON” from the User
menu in the Setting mode.
Turning the power off
1. Turn the ignition switch to OFF position.
Note:
• Do not turn off the power while recording an audio
CD or importing/exporting/deleting data. The data
processed may be broken.
Engine ON
position
To Next Page
Loading...
Need help?
General
