82
MAX973HD
English
INSTALLATION AND WIRE
CONNECTION MANUAL
Installing the Main Unit
Cautions on Installation
1. Prepare all parts necessary for installing the
main unit before starting.
2. This model features an operation panel that
slides forward. On some types of cars, the
operation panel may make contact with the
dashboard or gear lever, in which cause it
cannot be installed.
Before installing, check that the unit will not
hamper operation of the gear lever or obstruct
your view before selecting the installation
location.
3. Install the main unit within 30° of the
horizontal plane.
4. If you have to do any modification on the car
body, such as drilling holes, consult your car
dealer beforehand.
5. Use the included screws for installation. Using
other screws may cause damage.
6. This unit has a fan motor in the back of the
main unit. When the fan motor vent is covered
with leads or mounting bracket, it may cause
a malfunction. Be sure not to cover it when
wiring leads.
Dashboard
Gear lever
(check that it does not
touch the operation panel.)
Max. 30°
Max. 8 mm (M5 screw)
Chassis
Damage
Chassis
Fan motor vent
To Next Page
Loading...
Need help?
General
