MP3/WMA Operations
34
MAX973HD
English
Owner’s manual
Selecting the MP3/WMA mode
The MP3/WMA mode is actually separated in CD
mode or SD Card mode, and the selecting
methods differ depending on the media source.
Selecting the CD mode
1. Set a disc which the MP3/WMA data is
recorded to the DVD player.
The system will automatically read the disc
data, change to the CD mode (MP3/WMA
mode), and start playback after a while.
➜ “Setting/Ejecting a Disc” (P. 15)
● When a disc is already set
1. Press the [SRC] (Source) button to display the
Source menu screen.
2. Touch the [DVD/CD] key to select the CD
mode.
The system changes to the CD mode (MP3/
WMA mode), and starts playback from the
previous position.
Selecting the SD Card mode
1. Set an SD card which the MP3/WMA data is
stored to the SD card slot.
➜ “Setting/Ejecting an SD Card” (P. 17)
2. Press the [SRC] (Source) button to display the
Source menu screen.
3. Touch the [SD Card] key to select the SD
Card mode.
The system changes to the SD Card mode
(MP3/WMA mode), and starts playback after
a while.
Note:
• When the operation panel is opened while playing
back music data in the SD card, the playback will
be stopped and the “Stop” message will appear in
the display.
MP3/WMA mode screen
● AV Shortcut menu on the Map screen
MP3/WMA operations
Selecting a track to play
• This operation cannot be performed from the
AV Shortcut menu screen.
1. Display the desired Track key on the Track list
pane by touching the [{] or [}] key, touch the
Track key to play back the track.
Playback of the specified track starts.
WARNING
• Some tracks may be recorded at a higher
volume level than desired. Increase the
volume gradually from the minimal
setting after the playback has started.
WARNING
• Some tracks may be recorded at a higher
volume level than desired. Increase the
volume gradually from the minimal
setting after the playback has started.
Folder name
Track list pane
Information pane
File type
To Next Page
Loading...
Need help?
General
