Modify the basic software parameters set during the initial set-up process. See page
6.
These settings determine how user data is managed. There are three options:
• Backup User Data: All user data and the current settings are saved on the
inserted microSD card, and each backup is stored in a new file.
• Restore User Data: All user data and the settings are overwritten with the
information stored in the latest backup file.
• Delete User Data: All the user backup files are deleted.
4.3.1 Route preferences settings
The following settings determine how routes are calculated:
Edit the parameters of the vehicle profile. See page 71.
Optimise the route calculation for different situations and vehicle types
by changing the planning method. See page 72.
Select on-road or off-road navigation. See page 60.
Select your preferred road types for the route. See page 73.
4.3.1.1 Vehicle profile
You can select the following vehicle types:
Manoeuvre restrictions and directional constraints are taken into
account when planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-
only roads are used only if they are
inevitable to reach the destination.
Walkways are excluded from routes.
Creating a profile makes it possible to set up vehicle parameters used in route planning. You
can have several profiles for the same vehicle.
To add a new vehicle profile, perform the following steps:
1. Tap
, browse the list of vehicles, and tap .
2. Select the vehicle type and set the parameters below.
NX405E English 71
To Next Page
Loading...
Need help?
General
