29NX405E
English
English
Owner’s Manual
English
Owner’s Manual
11. iPod OPERATIONS
iPod/iPhone can be connected by using the connector
cable supplied with the iPod/iPhone, but in this case,
you can enjoy its audio sound only. To enjoy video
movies stored in the iPod/iPhone with video displaying
them on this unit, it is required to use the special
connector cable (CCA-750) separately sold.
However the new products such as the device with
LightningTM connector only can connect 10-pin cable
(no video signal output),so these new products
cannot display video in video mode.
Note:
• This system will not operate or may operate
improperly with unsupported versions.
• For detailed information on the playable iPod/iPhone
models, see our home page: www.clarion.com
Notes on Using iPod/iPhone
• Do not connect an iPod/iPhone to this unit with a
headphone connected to the iPod/ iPhone.
• After the iPod/iPhone has been connected to this unit,
the buttons of iPod are disabled for operation in the
Music mode. In the Video mode, do not operate the
buttons of iPod.
• When in the iPod mode, the screen image input from
the AUX terminal, is output to the rear monitor.
• When no data is present, the title display will remain
blank.
• Set the language setting of iPod/iPhone to English
before connecting your iPod/iPhone. Some
characters of the other languages may not be
displayed correctly in this system.
• Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when the
internal battery of iPod/iPhone has run down, this
function may not operate correctly. You must connect
the iPod/iPhone after charging the battery if it has run
down.
iPod Audio Menu Operations
Connect your iPod/iPhone to the USB connector. The
system will automatically detect the connected device.
Note:
1. This system has two USB connectors, please
connect to the USB with the label of “iPod/iPhone”.
By connecting another USB cable, iPod/iPhone can’t
play back the music.
2. When the iPod mode and operate the audio player
or internet radio other than iPod, there is a case that
iPod doesn’t playback correctly.
The playback starts after a while, from where the iPod/
iPhone has been paused.
• When iPod/iPhone is already connected
Touch the [
] button on the Main Menu screen.
The system changes to the iPod mode, and starts
playback from the previous position.
iPod Audio ID3 Mode Screen
13
5 3
6 7
2
14
1011
12
15
4
9
8
1
1 - Option button
2 - Repeat button
3 - Shue button
4 - Previous Track /Fast Backward button
5 - Play/Pause button
6 - Next Track/Fast Forward button
7 - ID3 Information
8 - Next Page [
] / Previous Page [ ] button
9 - Category list
10 - System time
11 - Bluetooth status indicator
12 - Playback status indicator
13 - Art work
14 - Shortcut button
15 - Progress bar
To Next Page
Loading...
Need help?
General
