3.4 Editing the route
When navigation has already started, there are several ways to modify the planned route.
You have the following options:
• Setting a new starting point, see page 50
• Adding an additional destination, see page 51
• Modifying the list of destinations, see page 52
• Saving the planned route, see page 52
• Deleting the planned route, see page 53
• Selecting a route alternative when planning the route, see page 54
• Selecting a route alternative for an existing route, see page 55
• Pausing guidance, see page 56.
3.4.1 Setting a new starting point
For normal navigation, all routes are calculated from the current position. You can pause
navigation to check future routes, simulate them or see their length in time and distance. Then
you can set the starting point of the route to a location other than the current GPS position.
1. Tap
on the Navigation view to access the Navigation menu.
2. In the Navigation menu, tap
.
3. The first line from the bottom is the start of the route, normally the current GPS
position. Tap
, select , and confirm your action
at the warning message.
50 NX405E English
To Next Page
Loading...
