Clarion NX405E - Preset Scan

40 NX405E
English
English
Owner’s Manual
English
2. AF (Alternative Frequency) Function
The AF function switches to a dierent frequency on the
same network in order to maintain optimum reception.
Auto Store
The Auto Store is a function for storing up to 6 stations
that are automatically searched in sequentially. If the
number of receivable stations cannot reach to 6, the
previous stored station remains.
1. Touch the [FM1/2/3/AM] button to select the desired
band. (FM or AM)
2. Touch the [
] button, and then touch the [ ]
button to start the Auto Store.
A beep sounds and the stations with good reception are
stored automatically to the preset list.
Notes:
1. After auto store, the previous stored stations will be
overwritten.
2. The unit has 4 bands, but FM3 and AM can store by
Auto Store function.
Preset Scan
The Preset Scan receives the stations stored in the
preset memory in order. This function is useful when
searching for the desired station in memory.
1. Touch the [FM1/2/3/AM] button to select the desired
band. (FM or AM)
2. Touch the [
] button to start the Preset Scan.
The unit starts scanning each station for 10 seconds
sequentially. But the station stored is not a valid station;
the scanning time is only 2 seconds.
3. When the desired station is tuned in, touch the [
]
button again to stay in that station.
DX/Local Setting
The DX / Local setting changes the tuner sensitivity in
order to separate closely spaced stations. This feature is
useful in areas that have many radio stations in close
proximity.