3 Using the navigation
By default, NX405E calculates routes using the road network of the maps provided with the
product.
You can select the destination and start navigating to it right away (normal navigation) if you
need a route for immediate navigation.
You can also plan a route independently of your current GPS position even without GPS
reception. To achieve this, you need to set a new starting point in the Multipoint Route menu.
It also suspends guidance so that the route is not recalculated when a new position is
received. See Page 50.
You can plan routes with multiple destinations by selecting a first and a second destination
and adding it to your route. You can add as many destinations to your route as you like. See
Page 46.
You can also use NX405E for off-road navigation. See page 60.
3.1 Selecting a destination
You can choose your destination by selecting one of the following options:
• Using combined search to search among different destination types at once, see page
22
• Entering a full address or a part of an address, for example a street name without a
house number, see page 25
• Selecting a Place as your destination, see page 34
• Selecting a previously saved location as your destination, see page 40
• Selecting a location from the History of previously used destinations, see page 41
• Selecting a previously saved route, see page 43
• Entering the coordinate of the destination, see page 44
• Selecting a location on the map, see page 45
• Planning a multipoint route, see page 46.
3.1.1 Using combined search
There are several ways to select your destination. You can initiate a separate search for
addresses, Places, saved locations, or recent destinations, but the fastest way to search for
any of these is to use combined search.
Perform the following steps to use combined search:
1. Tap
on the Navigation view to access the Navigation menu.
2. Tap
.
22 NX405E English
To Next Page
Loading...
Need help?
General
