5.6 The map is hidden behind an image of a junction
Issue: The map is not visible because it is hidden behind an image of a junction.
Cause: If you are approaching a motorway exit or a complex intersection and the needed
information exists, the map is replaced with a 3D view of the junction. The lanes you need to
take are displayed with arrows.
Solution: If you want to hide the currently displayed junction and return to the Navigation
view, tap the picture. To turn off this feature, perform the following steps:
1. Tap
, , and .
2. Tap
. Now the tunnel view will not appear again.
NX405E English 83
To Next Page
Loading...
Need help?
General
