Clarion NX405E User Manual

53NX405E
English
English
Owner’s Manual
English
Owner’s Manual
USB Device
Problem Cause Measure
USB device cannot be inserted. The USB device has been inserted
with wrong direction.
Reversing the connection direction
of the USB device, try it again.
The USB connector is broken. Replace with a new USB device.
USB device is not recognized. The USB device is damaged. Disconnect the USB device and
reconnect. If the device is still not
recognized, try replacing with a
dierent USB device.
Connectors are loose.
No sound heard with the display
“NO FILE” shown.
No MP3/WMA le is stored in the
USB device.
Store these les properly in the USB
device.
Sound skips or is noisy. MP3/WMA les are not encoded
properly.
Use MP3/WMA les encoded
properly.
The video image of iPod/iPhone is
disturbed.
The TV Signal setting of the iPod/
iPhone is not set correctly.
Set the TV Signal setting (NTSC/
PAL) of the iPod/iPhone correctly.
Bluetooth
Problem Cause Measure
Cannot pair the Bluetooth enable
device with the car audio system.
The device does not support the
proles required for the system.
Use another device to connect.
The Bluetooth function of the device
is not enabled.
Refer to the user manual of the
device for how to enable the
function.
The audio quality is poor after
connection with a Bluetooth
enabled device.
The Bluetooth reception is poor. Move the device closer to the car
audio system or remove any
obstacle between the device and
the system.

Clarion NX405E Specifications

General

Brand	Clarion
Model	NX405E
Category	GPS
Language	English