Why is the Clarion NZ501E Car Receiver remote control unit not working?
If the remote control unit for your Clarion Car Receiver isn't working, it could be due to direct sunlight falling on the light-receptive part of the unit. Also, the battery of the remote control unit may be dead or missing. Check the battery of the remote control unit.
How to fix a Clarion Car Navigation system when the power does not turn on?
If your Clarion Car Navigation system doesn't turn on, and there's no sound, it might be due to a blown fuse. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Another cause could be incorrect wiring, in which case you should consult your installation center.
What to do if the Clarion NZ501E Car Receiver disc cannot be loaded?
If your Clarion Car Receiver won't load a disc, it might be because a disc is already loaded. Eject the disc before loading the new one. Alternatively, there could be foreign matter already in the disc slot. Remove the foreign matter, or consult a service station.
What to do if the image is not displayed on my Clarion Car Navigation system?
If the image is not displayed on your Clarion Car Navigation system, ensure that the parking brake is engaged.
Why are video images not displayed on my Clarion Car Navigation system?
If video images are not displayed on your Clarion Car Navigation system, ensure that the parking brake is engaged.
Why won't my Clarion Car Navigation system load a disc?
If your Clarion Car Navigation system won't load a disc, make sure there isn't one already inside. Eject the disc before loading the new one. Also, check for any foreign matter in the disc slot and remove it, or consult a service station.
Why is there no sound and no file display on my Clarion Car Navigation system?
If there's no sound and no file display on the file list of your Clarion Car Navigation system, it may be because no MP3/WMA file is stored in the USB device. Store these files properly in the USB device.
Why is the image not displayed on my Clarion Car Receiver?
The image may not be displayed on your Clarion Car Receiver because the parking brake is not engaged. Check that the parking brake is engaged.
What to do if the Clarion NZ501E USB device is not recognized?
If your Clarion Car Receiver isn't recognizing the USB device, try disconnecting and reconnecting it. If it's still not recognized, replace it with a different USB device. Also, check if connectors are loose.
Why does my Clarion NZ501E Car Receiver power not turn on?
If your Clarion Car Receiver doesn't power on, check the fuse. If it's blown, replace it with one of the same amperage. If the fuse blows again, consult your store of purchase. Also, incorrect wiring could be the cause, in which case you should consult your installation center.
General| Brand | Clarion |
|---|---|
| Model | NZ501E |
| Category | Car Receiver |
| Language | English |
To Next Page
