Why Clarion NZ501E Car Receiver disc cannot play with the display “PARENTAL VIOLATION” shown?
If your Clarion Car Receiver displays “PARENTAL VIOLATION” and won't play the disc, the feature exceeds the set parental level. Release the view limitation or change the parental level.
Why is the audio quality poor after connection with a Bluetooth enabled device to Clarion Car Receiver?
If the audio quality is poor after connecting a Bluetooth enabled device to your Clarion Car Receiver, the microphone may not be correctly positioned. Use optional external microphone and adjust the position of it. Also, the Bluetooth reception might be poor, so move the device closer to the car audio system or remove any obstacle between the device and the system.
Why does my Clarion NZ501E Car Receiver power not turn on?
If your Clarion Car Receiver doesn't power on, check the fuse. If it's blown, replace it with one of the same amperage. If the fuse blows again, consult your store of purchase. Also, incorrect wiring could be the cause, in which case you should consult your installation center.
What to do if the Clarion NZ501E USB device is not recognized?
If your Clarion Car Receiver isn't recognizing the USB device, try disconnecting and reconnecting it. If it's still not recognized, replace it with a different USB device. Also, check if connectors are loose.
Why is the image not displayed on my Clarion Car Receiver?
The image may not be displayed on your Clarion Car Receiver because the parking brake is not engaged. Check that the parking brake is engaged.
What to do if nothing happens when buttons are pressed on my Clarion Car Receiver?
If nothing happens when you press the buttons on your Clarion Car Receiver, it could be that the microprocessor has malfunctioned. Press the reset button with a thin rod to solve this problem. Note that when the reset button is pressed the power turns off and frequencies of radio stations, titles, etc. stored in memory are cleared.
Why is the sound bad directly after the Clarion Car Receiver power is turned on?
If the sound quality of your Clarion Car Receiver is poor right after turning it on, condensation may have formed on the internal lens when the car was parked in a humid place. Let it dry for about 1 hour with the power on.
What to do if Clarion Car Receiver sound skips or is noisy?
If the sound skips or is noisy on your Clarion Car Receiver, the disc might be dirty. Clean the disc with a soft cloth. Alternatively, the disc might be heavily scratched or warped, so replace it with a disc in good condition. Also, MP3/WMA files are not encoded properly, so use MP3/WMA files encoded properly.
How to fix the disturbed video of iPod/iPhone image on Clarion NZ501E Car Receiver?
If the video image from your iPod/iPhone is disturbed on your Clarion Car Receiver, the TV Signal setting of the iPod/ iPhone is not set correctly. Set the TV Signal setting (NTSC/ PAL) of the iPod/iPhone correctly.
What to do if the Clarion NZ501E Car Receiver disc cannot be loaded?
If your Clarion Car Receiver won't load a disc, it might be because a disc is already loaded. Eject the disc before loading the new one. Alternatively, there could be foreign matter already in the disc slot. Remove the foreign matter, or consult a service station.
General| Brand | Clarion |
|---|---|
| Model | NZ501E |
| Category | Car Receiver |
| Language | English |
To Next Page
