To Next PageTo Next PageWhy cannot pair the Bluetooth enable device with the Clarion NZ501E Car Receiver?
If you cannot pair a Bluetooth enabled device with your Clarion Car Receiver, the device may not support the profiles required for the system, so use another device to connect. Also, the Bluetooth function of the device might not be enabled, so refer to the user manual of the device for how to enable the function.
Why is the Clarion NZ501E Car Receiver remote control unit not working?
If the remote control unit for your Clarion Car Receiver isn't working, it could be due to direct sunlight falling on the light-receptive part of the unit. Also, the battery of the remote control unit may be dead or missing. Check the battery of the remote control unit.
What to do if the Clarion Car Receiver USB device cannot be inserted?
If your Clarion Car Receiver won't allow you to insert a USB device, it might be because the USB device has been inserted in the wrong direction. Reversing the connection direction of the USB device, try it again. Also, the USB connector might be broken, so replace with a new USB device.
Why is Clarion Car Receiver display dark?
If the display on your Clarion Car Receiver is dark, the brightness control might be too low. Adjust the brightness properly. The operating condition might not be good, so set to an appropriate temperature (25 or so) and check it again. The headlight of the vehicle might be lit (The display is made dark at night to prevent the glare. When the headlight of the vehicle is lit in the daytime, the display gets dark).
Why is there no sound heard and no file display on file list on Clarion Car Receiver?
If there is no sound and no file display on the file list of your Clarion Car Receiver, it could be because no MP3/WMA file is stored in the USB device. Store these files properly in the USB device.
Why is the image disturbed when the VTR is connected to Clarion NZ501E?
If the image is disturbed when the VTR is connected to your Clarion Car Receiver, the NTSC/PAL setting might be improper. Set the AUTO/PAL/NTSC properly according to the VTR.
Why video images are not displayed on Clarion NZ501E?
The video images may not be displayed on your Clarion Car Receiver because the parking brake is not engaged. Check that the parking brake is engaged.
Why is there no power on my Clarion NZ501E?
If your Clarion Car Receiver isn't powering on and no sound is produced, it could be due to a blown fuse. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Another cause might be incorrect wiring, in which case you should consult your installation center.
What to do if Clarion Car Receiver buttons don't work and the display is inaccurate?
If the buttons on your Clarion Car Receiver aren't responding and the display is inaccurate, the microprocessor may have malfunctioned. To fix this, press the reset button with a thin rod. Note that pressing the reset button will turn off the power and clear stored radio frequencies and titles.
General| Brand | Clarion |
|---|---|
| Model | NZ501E |
| Category | Car Receiver |
| Language | English |
Details the operation and function of each button on the remote control unit.
Guides the user on how to load and play a disc in the DVD player.
Guides on connecting a USB memory and selecting the USB Audio mode.
Explains how to play MP3/WMA files from USB memory, including controls.
Guides on connecting a USB memory and selecting the USB Video mode.
Explains how to play video files from USB memory, including controls.
Guides on connecting an iPod/iPhone and selecting the iPod Audio mode.
Explains how to control the iPod/iPhone playback and settings via the unit.
Guides on connecting an iPod/iPhone and selecting the iPod Video mode.
Guides on selecting the Bluetooth Audio mode to play music from a device.
Details the process of pairing a Bluetooth audio player with the system.
Guides on selecting the Bluetooth Telephone mode for calls.
Details the process of pairing a cellular phone with the system.
Guides on how to switch to and operate the DVB-T mode.
Explains how to select and use AUX 1 or AUX 2 inputs for external devices.
Guides on how to switch to and view the external camera feed.
Guides on setting and managing the anti-theft code for security.
Addresses common problems related to power, buttons, display, and remote control.
Lists issues related to disc loading, sound skipping, video display, and parental controls.
Troubleshoots issues with USB device insertion, recognition, sound, and video.
Addresses problems with Bluetooth pairing, audio quality, and reception.
Essential preparation steps before starting the installation process.
General cautions to be observed during installation and handling.
Provides critical warnings and checks before installing the unit in a vehicle.
Step-by-step instructions for installing the main unit in a Nissan vehicle.
Step-by-step instructions for installing the main unit in a Toyota vehicle.
Shows the detailed wire connections for the NX501E model.
Shows the detailed wire connections for the NZ501E model.
Guides on how to use the map screen, including viewing position, routes, and data fields.
Explains the Quick menu for accessing frequently used navigation controls and functions.
Explains various methods for selecting a destination, including address and POI search.
Guides on entering addresses, city/town names, and street names to find destinations.
Guides on using the Quick Search feature to find nearby Places by name.
Explains how to find Points of Interest using predefined categories like petrol stations or restaurants.
Guides on searching for nearby assistance services like car repair or police stations.
Guides on selecting a destination directly from the map interface.
Explains how to select a previously saved location as a destination.
Guides on saving and selecting your Home location for quick navigation.
Explains how to select destinations from the history of previously visited locations.
Guides on entering destination coordinates in various formats for navigation.
Guides on creating multi-point routes by adding destinations sequentially.
Details how to check route parameters and access related functions like editing or cancelling.
Explains how to add new destinations, waypoints, or change the final destination of an active route.
Guides on setting a new starting point for route planning, independent of current GPS.
Explains how to add, remove, or reorder destinations in an active route.
Explains how to check and select alternative routes during route planning.
Guides on how to recalculate and compare route alternatives for an active route.
Explains how to change vehicle type to optimise route calculations.
Guides on adjusting road type preferences for route planning.
Explains how to save a location to the Favourites list for quick access.
Guides on saving map locations as alert points, like speed cameras.
Details proximity warnings for speed cameras, schools, and other alert points.
Explains how the system warns the user when they exceed the current speed limit.
