Clarion VRX8370R - Page 51

~ 8. WIRE CONNECTIONS
VTR/CCD
TT] ~Red: AUDIO output right
[1] ~White: AUDIO output | NO FADER (#1)
| [If] Yellow: VIDEO output
= Orange gs Parking brake lead (*2) (*9
| White/red SPR anOneaa ie) Ae?
Black Ms Security camera control lead (+9)
@{C> Ground lead (+3)
Orange/white eee
Mst> illumination power supply lead
Accessory power supply lead (*4)
DSP/EQ
| SCrAISSCUs« Maan power supply lead (+5)
Black
(lou
Ground
lead
(3)
Blue/whit
al
gs
Amplifier
control
(remote-turn-on)
lead
(6)
ea Green
pe] & Rear left
Rear View of the Source Unit
Attached connection lead
(20-pin DIN lead)
Attached connection lead
(13-pin C-BUS cable)
Yellow
Purple El ®
Top View of the Green/black ae 5 digs ‘al
br
:
z
Tuner
Amplifier
Unit
Purple/black
ear
le
~S> © Rear right
Connect to the Speakers.
@ Front left
White/black
=
€
Front
right
Gray/black
©)
Front
ieft
© Front right
Antenna terminal 4 (MINI 6 3.5) (#7)
Antenna terminal 3 (MINI o 3.5)
Antenna terminal 2 (MINI $ 3.5)
Antenna terminal 1 (MINI @ 3.5)
Radio antenna termina! (JASQO) (+9)
CD changer or MD changer terminai
Audio output (input) terminal L+R (RCA) (+8)
+1: Fader cannot be adjusted with these outputs. Connect them to an amplifier (sold separately), etc.
#2: Connect to the ground lead of the parking brake lamp in the instrument panel.
* 3: Connect securely to the metal part of the vehicle with a screw, etc.
+ 4: Connect to the power supply terminal which can be turned on and off by the ignition switch.
#5: Connect to the power supply terminal where the power is always supplied regardless of whether
the ignition switch is turned on or off.
*6: Connect to the remote turn-on lead of amplifiers.
*7: Connect the antenna for TV (MINI o 3.5). When the TV diversity is turned off, connect the TV
antenna.
* 8: Connect this lead to an external amplifier or Clarion expand DSP/EQ (sold separately), etc. using
the RCA lead (L, R) (solid separately).
+9: Use the attached extension lead when necessary.
VRX8370R 5 1