Clarion VX404 - Fast Forward;Fast Backward; iPod Audio Bluetooth Mode

32
VX404
English
Parking brake lamp
cord to battery
Electro-tap
Parking brake
Parking brake cord (Grass-
green)
Parking brake signal
cord
Stopper
Parking brake signal
cord
Parking brake cord
(Grass-green)
How to attach the electro-tap
1. Place the Parking brake cord at the stopper,
and fold it back in the direction of the arrow
2. Pass the Parking brake signal cord through,
and fold it back in the direction of the arrow.
Parking brake
signal cord
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
• Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV
input when the parking brake is engaged.
• When the parking brake cord is not connected, the monitor will not show any video sources.
• If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking
brake while conrming safety, and then engage the parking brake again.
VX404_quick start guide_EN_InDesign.indd 32 2014-4-4 13:58:46