Basic Operations
Adjusting the CLOCK
1. Press the [SETTING] button, then touch the
[CLOCK] key.
2. The entry keypad will appear. Enter your time
without spaces. For example, 12:45 would be
entered as ‘1245’. Press [OK] to accept or [ ]
to backspace and correct your entry. If you
have selected to display your time in 24 hour
format, you must enter your time in 24 hour
format such as ‘1745’ for 5:45PM.
3. To change your time from AM to PM, press
AM or PM text in the CLOCK selection box.
If you have selected to display your time in 24
hour format, you will not have this selection.
Adjusting the RADIO region
1. Press the [SETTING] button, then touch the
[RADIO ] key.
2. A region selection menu will appear. Scroll
down using the arrow at the bottom of the menu.
Scroll up using the arrow at the top of the menu.
Once you have located the region that matches
your area’s radio spacing and frequency range,
touch the region to make your selection. If the
region selected is incorrect, radio reception will
be poor.
Reset to Factory Defaults
1. Press the [SETTING] button, then touch the
[LOAD FACTORY ] key.
2. A selection menu will appear. Select [YES] to
restore your unit to factory default settings. This
function will erase all memory from the unit and
you must reset all personalized items such as
tuner presets.
NOTE: You will be asked once to confirm that
you would like to reset the unit. The unit will
power down and restart with factory defaults.
Displaying the Navigation Map
1.
2.
Press and hold the shortcut key
for more then 2 seconds.
* Navigation module must be purchased
separately and connected.
You may also press the [MENU] button
or return to the main menu and select the
[NAVI] function to display the navigation
map.
21
VX409/VZ409
English
Owner’s manual
[ ]
To Next Page
Loading...
