Cleanmate S2000 PRO MAX - Component Maintenance Schedule; Recommended Maintenance Intervals

Component Maintenance intervals Replacement intervals
Mop cloth
After each use
Every three months/if necesseary
Dust bag
Replace the dust bag when the APP
indicates that it is full
Watertank
After each use
After each use
Fall sensors
After each use
Side brush Every 2 weeks
Every 3-6 months/if necesseary
Every 6-12 months/if necesseary
Every 3-6 months/if necesseary
Roller brush Every 1 week
High-efficiency HEPA-filter
Every 1 week
High efficiency primary filter Every 1 week
Every 1 weekLidar
Universal Wheel
Down-looking Sensor
Infrared buffer anti-collision plate
Host charging pole piece
Charging pole piece of dust collection
station
Component Maintenance Frequency
In order to maintain the peak performance of the main engine, it is recommended to refer to
the frequency listed below for Component Maintenance of the main engine
23
Dust box (for watertank)