Please see following chart for troubleshooting of the robot
Troubleshooting on robot and the dust collector
34
Item
Fault prompt Cause Solution
1
Main brush fault, please
clean the main brush
Main brush stuck. Pls dismantle and the clean main brush. Pls
remove all fragile objects and cords, clothing,
paper, loose cables, make sure No scattered
items on the ground.
2
Side brush fault, please
clean the side brush.
Side brush stuck Pls dismantle and clean side brush. Pls remove
all fragile objects and cords, clothing, paper,
loose cables, make sure No scattered items on
the ground.
3
Wheel overload, please clean
the wheel assembly.
Drive wheel stuck Pls check and clean the wheel. Pls remove
all fragile objects and cords, clothing,
paper, loose cables, make sure No
scattered items on the ground.
4
Front bumper fault, please tap the
bumper
Front bumper stuck Pls tap the bumper many times and clean
it
5
Please clean the front
bumper lens.
Something is stuck or
shading the front bumper
lens
Pls clean the front bumper sensorlens
6
Please clean the anti-drop sensors
Something is covering the
anti-drop sensors
Pls clean the anti-drop sensors
7
Please put the machine in a safe
place.
Machine is not in a
safe place
Pls move the machine and restart it
To Next Page
Loading...
