EasyManua.ls Logo

Cleanmate S2000 PRO MAX - Troubleshooting Robot Operation; Resolving Robot Errors and Operational Issues

Cleanmate S2000 PRO MAX
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trouble shooting robot
35
8
Please turn on the power switch. Power switch turned off
during charging
Please turn on the power switch
9
Please poke the surface of the
laser sensor.
The laser sensor is
stuck or covered.
Pls clean the laser sensor gently
10
Please clean the laser sensor lens
on top.
Something stick or shaded
on the laser sensor
Pls clean the laser sensor and start-up robot
in a safe place
11
Please click the start button again. Button is dusty Please click the start button again
12
Dust fan fault
Robot Fault
Pls Turn off the power switch and restart try
again. Pls contact the service if still not working.
13
Front wheel fault, pls restart
Robot Fault
Pls Turn off the power switch and restart try
again. Pls contact the service if still not working.
14
Communication error, pls restart
Robot Fault
Pls Turn off the power switch and restart try
again. Pls contact the service if still not working.
15
Battery faulty
Battery temperature abnormal
Pls restart try again after the battery
temperature recover.
16
The robot is trapped. Please
move to a new place
The robot trapped by
something
Pls move robot to a new place and restart it.
17
Please put the robot on the
charging station
Battery too low to find the charge
station
Pls place robot on the charge station for
charging.

Related product manuals