EasyManua.ls Logo

Cleanmate S2000 PRO MAX - Battery Disposal and Removal; Description of Obsolete Batteries; Battery Removal Procedure

Cleanmate S2000 PRO MAX
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. If you want to discard the battery in this machine, please do not discard them along with domestic garbage, but hand
them over to the nearest waste battery recycling station or after-sales service center for centralized treatment.
2. The following instructions are not for ordinary users, but for the disposal instructions of the final battery disposer.
3. The chemical substances contained in the built-in battery of this machine will pollute the environment. Please be sure to
take out the battery in the body before disposing of the robot. The battery should be taken out and handed over to a
professional battery recycling point for centralized treatment.
1. Leakage and exudation from batteries can cause human injury.
2. If there is any leakage or exudation from the battery, make sure to avoid contact with eyes or skin.
3. In case of inadvertent contact, wash hands with clean water and rinse eyes immediately. If you feel uncomfortable,
please see a doctor immediately.
Description of Obsolete Batteries:
Cautious:
3
Remove Battery:
NOTE:
The following information is only applicable when discarding this robot, not daily operation instructions!
The battery can only be removed when the battery is completely exhausted. No matter under what circumstances, the
battery cannot come into contact with metal objects.
The procedure for removing the battery is as follows:
Let the robot run until there is no electricity without touching the charging seat;
Turn off the power switch of the robot;
Remove the screw on the battery cover plate;
Remove the battery cover plate;
Pull off the connector plug of the battery and remove the battery.

Related product manuals