Clevo PA71HS User Manual

Disassembly
2 - 20 Removing the LCD Module
2.Disassembly
7. Lay the LCD module down on a flat surface. Carefully remove the mylar covers - and screws - .
8. Run your fingers around the inner frame of the LCD panel to lift it up at points - as indicated by the arrows,
run your fingers again around the inner frame at point to lift from one corner to the other as indicated by the
arrows and then lift up the outer frame at point as indicated by the arrows (Figure 15e).
9. Remove the LCD front cover (Figure 15f).
29
30
31
32
33
34
35
36
37
f.
e.
37
32
30
36
33
35
34
29
31

37. LCD Front Cover
•2 Screws
Figure 15
LCD Module
Removal
e. Remove rubber and
screws and then careful-
ly release the inner
frame of the LCD panel
at the points indicated by
the arrows.
f. Remove the LCD front
cover.

Clevo PA71HS Specifications

General

Brand	Clevo
Model	PA71HS
Category	Laptop
Language	English