Clevo W270EFQ - Page 137

Upgrading The Computer
Upgrading the System Memory (RAM) 6 - 15
6
11. Replace the bay cover (see sidebar) and screws (make sure you reconnect the
fan cable before screwing down the bay cover).
12. Restart the computer to allow the BIOS to register the new memory configuration
as it starts up.

Cover Pins
Note that this computer
model has four cover
pins. These pins need to
be aligned with slots in
the case to insure a
proper cover fit, before
screwing down the bay
cover.
Figure 6 - 10
Component Bay
Cover Pins