47
EVH-X SPACE 2.1 - 12.1
M0SM10N17-03
LIST OF ALARMS
Alarm reset: switch on and off the unit
Before resetting an alarm identify and remove its cause.
Repeated resets can cause irreversible damage.
Before performing any intervention, read the warnings in the Maintenance chapter.
A = AUTOMATIC reset
M = MANUAL reset
9 CONTROL
ID DESCRIPTION RESET
A E00 TimeOut RS2 Display_Scheda base serial fault A
A E01 Return temperature probe alarm A
A E02 Temperature probe alarm of source input water A
A E03 Temperature probe alarm of source output water A
A E04 Treatment coil temperature probe alarm A
A E05 Return temperature probe alarm of the electronic thermostatic A
A E06 High/low transducer alarm A
A E08 Thermostat return temperature probe alarm A
A E10 Not used -
A E11 Utility fan protection alarm M
A F01 Refrigerant protection alarm M
A F02 LP alarm from analogical input A
A I01 Condensate drain alarm A
A I02 Source flow alarm A/M
A I03 Source high temperature alarm in Cool A
A I04 Source low temperature alarm in Heat A
A I05 Source frost alarm A/M
A I06 Utility frost alarm A/M
A A08 Dirty filters alarm (timer elapsed) M
ALARM LOG
408
200
201
202
203
204
205
206
208
210
211
301
302
101
102
103
104
105
106