8
EVH-X SPACE 2.1 - 12.1
M0SM10N17-03
Manual
The manual provides correct unit installation, use
and maintenance.
Pay particular attention to:
Warning / prohibited / danger
indicate particularly important operations or
information, operations that must not be
carried out, that compromise the operating of
the equipment or may cause damage to
persons or things.
It is advisable to read it carefully so you will
save time during operations.
Follow the written indications so you will not
cause damages to things and injuries people.
Preliminaries
Only qualified personnel can operate on the
unit, as required by the regulation in force.
Risk situations
Only qualified personnel can operate on the
unit, as required by the regulation in force.
During designing it is not possible to plane
and operate on all risk situation.
Read carefully "Residual risk" section where all
situation which may cause damages to things
and injuries to people are reported.
Installation, starting, maintenance and repair
required specific knowledge; if they are carried
out by inexperienced personnel, they may
cause damages to things and injuries people.
Intended use
Use the unit only for the:
• air treatment
• Follow the limits defined in the technical
bulletin and on this manual.
Any use other than intended does not involve
the manufacturer in any commitment or
obligation.
Installation
Internal installation.
The positioning, hydraulic system, refrigerating,
electrics and the channelization of the air
must be determined by the system designer in
accordance with the local regulations.
Follow local safety regulations.
Verify that the electrical line characteristics
are in compliance with data quotes on the
unit serial number label.
Maintenance
Plan periodic inspection and maintenance in
order to avoid or reduce repairing costs.
Turn the machine off before any operation.
Modification
All unit modifications will end the warranty
coverage and the manufacturer responsibility.
Breakdown/Malfunction
Disable the unit immediately in case of
breakdown or malfunction.
Contact a constructor certified assistance
service.
Use original spares parts only.
Using the unit in case of breakdown or
malfunction:
• voids the warranty
• may compromise the safety of the machine
• may increase time and repair costs.
User training
The installer has to train the user on:
• start-up/shutdown
• set points change
• standby mode
• Maintenance
• what to do/what not to do in case of
breakdown.
Data update
Continual product improvements may imply
manual data changes.
Visit manufacturer web site for updated data.
Indications for the user
Keep this manual with the wiring diagram in
an accessible place for the operator.
Note the unit label data so you can provide
them at the assistance centre in case of
intervention (see "Unit identification" section) .
Provide a machine notebook that allows any
interventions carried out on the machine to
be noted and tracked making it easier to
suitably note the various interventions and
aids the search for any breakdowns.
In case of breakdown or malfunction:
• immediately deactivate the unit
• Contact a constructor certified assistance
service
2 GENERAL
To Next Page
Loading...
Need help?
General
