TROUBLESHOOTING
106
BH
Description
• PED PCB faulty
• The unit shuts down.
• The error code is displayed on the main PCB and user interface.
Possible causes
• Power supply problem.
• PED board faulty.
• IPM module faulty
bH
↓
Power supply problem.
After 5 minutes of shut down, switch on again and
check whether the problem can be solved.
YES →
Increase the power supply voltage to the required
value.
NO
↓
PED board faulty.
YES →
Replace the PED PCB and switch on again.
NO
↓
IPM module faulty.
YES →
Replace the IPM module and switch on again.
To Next Page
Loading...
Need help?
General