Putting your Closomat
®
into service
Switching on main switch
– Set main switch [1] (bottom left of WC
behind filter cover [2]) to “On” (Illustra-
tion shows “off-position”).
– The main switch is normally left perma-
nently “On” except when the
Closomat
®
is
not used for some time.
Functional check and demonstration
of WC
The WC functions can be actuated without
anyone sitting on the seat for the functional
check and to demonstrate operation of the
WC to other persons:
– Place the transparent checking cover [3]
sup plied between porcelain [4] and seat
[5]: This screens the douche jet
(illustration).
– Press one of the two push-keys [6] with
one hand.
– With the other hand simultaneously press
down the seat [5] at the rear (weight on
seat hinges):
The douche nozzle moves from the initial
position to the douche position and the
douche jet begins.
– Load seat hinges further and release push-
key: the douche nozzle returns to its initial
position and the warm air drying is started
automatically.
11
- E -
6
3
1
4
2
5
To Next Page
Loading...