7
P/N 192047138 Rev AA November 2017
Figure 1 - Chain Container
Figure 2 - Latchlok Hook
Figure 3 - 632 Trolley
Figure 4 - UT Trolley
Figure 5 - CM® Rocket™ Universal Pendant Control
ACCESSORIES
HOOK SUSPENSIONS
Swivel and rigid type hook suspensions are available for all Shopstar
Electric Hoists. However, swivel type hook suspensions are normally
recommended for most applications.
CHAIN CONTAINER
This accessory item (Figure 1) is used to hold the slack chain
and it is supplied with mounting hardware and instructions.
Chain containers are recommended for those applications where
slack chain will interfere with the load or drag on the oor as may
more often be the case with the double-reeved units (500, 600,
1,000lb - 226, 272, and 453kg). Chain containers are shipped
separately and can be furnished for units already in service.
LATCHLOK
®
HOOKS
CM’s Latchlok hooks are available (Figure 2) to replace the standard
upper and lower hooks used on the Shopstar Electric Hoists.
CM SERIES 632 TROLLEY
This lightweight, yet, rugged, manual push type trolley (Figure 3)
is designed to t a wide range of monorail beams and negotiate
tight curves. Provides mobility of your hoist.
CM UNIVERSAL (UT) TROLLEY
The CM Universal Trolley (UT) is designed to t virtually all
Columbus McKinnon powered chain hoists up to 3 ton capacities.
The rugged UT is available as a convertible plain unit, a geared unit
ideal for precise hoist positioning, and a motorized unit that’s perfect
for applications requiring high cycling and long distance hoist travel.
CM® ROCKET™ UNIVERSAL PENDANT CONTROL
The CM Rocket Pendant Control is engineered for maximum
operator comfort, while delivering the precision control your
application demands.
To Next Page
Loading...
