CMC S19HD - Page 33

MAN.234 Rev.6 ENG - Use and maintenance manual S19HD page 31 of 126
Communicate the error code shown on the
display, when you require technical assis-
tance to C.M.C. Service or authorized work-
shops.
Elenco degli stati macchina/Machine status list
N.
Display
code
Descrizione
Description
20
Er
Programma macchi-
na indefinito
Undefined machine
program
21
Er
Stato macchina inde-
finito
Undefined machine
status
22
C0
Macchina in trasla-
zione
Machine in travel
position
23
C1
Macchina in trasla-
zione sviluppata
Machine in travel
position and devel-
oped
24
C2
Macchina con alme-
no uno stabilizzatore
sul terreno
Machine with at
least one outrigger
on the ground
25
C3
Macchina con alme-
no uno stabilizzatore
sul terreno e aperta
Machine with at
least one outrigger
on the ground and
developed
26
P0
Macchina stabilizzata
inclinata
Machine stabilized
and inclined
27
P1
Macchina stabilizzata
Machine stabilized
28
P2
Macchina stabilizzata
sviluppata
Machine stabilized
and developed
29
P3
Macchina inclinata
sviluppata
Machine inclined
and developed
30
P4
Macchina non stabi-
lizzata sviluppata
Machine not stabi-
lized and devel-
oped
31
P5
Macchina non stabi-
lizzata inclinata e svi-
luppata
Machine not stabi-
lized, inclined and
developed
3.3.3 Emergency workbench
The emergency workbench (Picture 15) is placed on
the turret and it is useful in situations of emergency
and machine block for the recovery of the MEWP
aerial part by the operator on the ground.