MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 108 of 138
Lubricant:
• for chains:
Interflon Fin Lube Ep Plus
Composition: mixture of mineral oils and
vegetables, additives and Teflon®.
Density at 20°C: 0,89 g/cm3
Kinematic Viscosity at 20°C (ASTM D2983): 380
mPa.
Before oil replacement, place an oil drip tray in
order to avoid the leakage of oil in the
environment. Do not disperse the exhausted oil
or other consumables in the environment; put
them in the appropriate containers and give
them to the authorized collection centres.
8.15 Indications for the demolition of
the MEWP
In case of demolition, the machine
must be dismantled completely
according to the laws in force.
The different types of materials must be destined
to the respective authorized centers of
collection.
The following material must undergo differentiated
disposal therefore placed in suitable places and
containers:
o Ferrous materials: carpentries and mechanical
components.
o Plastic materials: gaskets, straps, and protections.
o Electrical materials: windings, controls, electro
valves and similar.
o Oils and lubricants: hydraulic oil, reducer lubricants,
and lubricants greases.
To Next Page
Loading...
Need help?
General
