CMC S28 User Manual

MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 107 of 138
8.14 Consumables
Hydraulic oil:
(hydraulic tank capacity: 50 l)
Gazpromneft Hydraulic HDZ 32 o 46
32
46
Density, 15°C, kg/l
ASTM D4052
0,867
0,874
Kinematic Viscosity,
40°C, mm2/s
ASTM D445
32
46
Kinematic Viscosity,
100°C, mm2/s
ASTM D445
6,45
8,16
Viscosity Index
ASTM D2270
151
154
Pour point °C
ASTM D97
-42
-42
Flash point COC, °C
ASTM D92
216
228
A biodegradable hydraulic oil, called BIOHYDRAN TMP
46, can be supplied as *optional:
Density, 15°C, kg/l
ASTM D4052
0,920
Kinematic Viscosity, 40°C,
mm2/s
ASTM D445
46
Kinematic Viscosity, 100°C,
mm2/s
ASTM D445
9,3
Viscosity Index
ASTM D2270
185
Pour point °C
ASTM D97
-42
Flash point COC, °C
ASTM D92
300
In case of refilling or replacement, it is
imperative to use the same hydraulic oil (or
equivalent) and respect the technical
specifications of the product already present
in the hydraulic circuit.
Motor oil:
Texaco Motor Oil S 5W-40
Density, 15°C, kg/l
ASTM D4052
0,850
Kinematic Viscosity, 40°C,
mm2/s
ASTM D445
76
Kinematic Viscosity, 100°C,
mm2/s
ASTM D445
12,9
Viscosity Index
ASTM D2270
171
Pour point °C
ASTM D97
-43
Flash point COC, °C
ASTM D92
232
Grease:
• for boom extension and outriggers:
Interflon Fin Grease LS1/2
Composition: mixture of mineral oils, calcium-
lithium complex thickener, additives and Teflon®.
(working range: from -20°C to +120°C)
• for fifth wheel, greasers, bearings, pins and
supports:
ARTOS-BA NF 2
Composition: mixture of mineral oils and
additives. NLGI 2 class.
(working range: from -20°C to +160°C)

CMC S28 Specifications

General

Brand	CMC
Model	S28
Category	Boom Lifts
Language	English