MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 40 of 138
Picture 31: password screen.
With this screen (Picture 31), it is possible to enter in a
menu useful to modify all the sensor calibrations.
The password can be inserted only by the
manufacturer CMC or the authorized workshop
staff.
The following operations must be made after
CMC authorization and under the supervision
of trained and specialized staff.
Picture 32: T16 screen.
In T16 screen (Picture 32), there are the values of
chassis angle sensor and it is possible to reset the
sensor calibration pressing simultaneously the first
button and the fourth one from the left placed on top.
To Next Page
Loading...
Need help?
General
