Software ver. CVPCA30E_1 42
Using History Functions
The BodyGuard® keeps a rolling 24 hour history of the current patient’s infusion
delivery. In this section we will address how this can be used. There is also a 500
event history log keeping track of the last 500 user actions in a date and time
stamped record. Whilst the pump is delivering medication pressing the
button repeatedly will scroll through: -
• Infused vs. volume to be infused
• Battery Level
• Boluses attempted, given & lock time review For the duration of this current
delivery
• Program review screen
Allows user to check current program parameters without having to stop
the infusion.
• Date & Time
Press to stop infusion delivery then press repeatedly to scroll
through:
Volume and boluses given in the last 24 hours
Bolus attempts, given and volume infused hour-by-hour for the last 24
hours (use the arrow keys to navigate through the hours)
Chart of bolus delivery during the last 24 hours, hour-by-hour.
Chart of Volume (incl. Boluses) delivered during the last 24 hours,
hour-by-hour.
Press to resume infusion when you return to the ‘STOP’ screen.
Events Log
To access the events history you need the Technician Access Code to access
Change Set Up.
.
The events history carries the last 500 user events (i.e. changes to programs,
pump started, stopped, etc) and the status of the pump (i.e. battery charge,
pressure levels, etc). It is not patient specific (i.e. the 500 events are likely to span
many patients recently treated with that particular pump).
To access the events history: -
1. From the main menu scroll to ‘Change Set Up’ and press _____
__
2. Enter the Technician Access Code – Change Set Up.
3. Scroll down to ‘Event Log’ and press .
To Next Page
Loading...
Need help?
General
