CME BodyGuard 575 Color Vision - Page 54

Software ver. CVPCA30E_1 54

Note: After the “End Battery“ signal has been activated or following long
periods of storage, wait 2 minutes after the pump has been connected
to an AC power supply before operating.
Caution: Leaving the battery in an uncharged state for a long period of time
may damage the battery.

Note: Whenever possible, use the pump connected to an AC power supply via
the charging unit. This preserves the battery power supply for
emergency use or for situations where the AC power is not available.

Note: Replace the battery once every two years.