OPERATING MANUAL
800.749.2761 www.coachcomm.com
11
Wired Interface (WI)
The Wired Interface (WI) is located in the main rack unit in the press box with the Control Unit (CU). The interconnectivity
between the WI and the CU is pre-wired at CoachComm.
Wired Interface Front
A. Power LED
B. Channel A/B Ports
C. Channel C/D Ports
Wired Interface Rear
A. DC Power Out – Not currently used with X-System operation
B. DC Power In
C. Channel A XLRs – Connects Wired Interface Port A to Port 2-Wire 1 of the Control Unit
D. Channel B XLRs – Connects Wired Interface Port B to Port 2-Wire 2 of the Control Unit
E. Channel C XLRs – Connects Wired Interface Port C to Port 2-Wire 3 of the Control Unit
F. Channel D XLRs – Connects Wired Interface Port D to Port 2-Wire 4 of the Control Unit
Note: See the diagram on the next page for more information about these channel ports.
Figure 11: Wired Interface Front View
Figure 12: Wired Interface Rear View
To Next Page
Loading...