2201R Mobile Tester User Guide
Chapter 2 Instrument setup and general operation
47090/322
Copyright © 2015 Aeroflex Limited. All rights reserved.
21
Starting the instrument
Please read the Getting Started manual for the 2201R Mobile Tester to learn how to power up the instrument. Once
the firmware is booted, the start menu appears (see below). Explanations in this user guide typically start from this
start menu.
For a general description of the front panel elements and how to navigate the menus, see section “Basic concepts of
operation” below. See also ’Connecting the device under test’ on page32 to learn the different possibilities of how
to connect mobile phones and cab radios to the 2201R.
Basic concepts of operation
The 2201R Mobile Tester can be operated either through the front panel or via remote control, either via Lector or
custom test software. The latter allows automation of test sequences and is explained in more detail in the SCPI
Reference Guide for the 2201R.
For operation through Lector and Scriptor, Cobham’s family of test automation products, please also refer to the user
guide for this software.
In manual mode, the 2201R Mobile Tester is operated through the front panel elements. The basic elements and
functions are explained in the Getting Started Manual.
To Next Page
Loading...
Need help?
General