2201R Mobile Tester User Guide
Chapter 3 Performing manual tests and measurements in GSM mode
47090/322
Copyright © 2015 Aeroflex Limited. All rights reserved.
47
RA Code
In GPRS mode, the full Routing Area (RA) code is broadcast by the base station.
Entry range: 0 to 255. Default value: 127.
Delay Time
Input field defining the time lag of the mobile’s voice signal when looped back to the mobile. The voice is looped back
as long as no receiver (BER) measurements are being performed. The delay is defined in milliseconds.
Entry range: 100 to 1000. Default value: 1000.
Group ID
Each voice group call in one network is uniquely identified by its group call reference. The group call reference is a
concatenated sequence of the group ID.
Entry range: 0 to 214217727. Default value: 200.
Priority Level
Defines the priority level associated with Group call.
Entry range: 0 to 7. Default value: 4.
To Next Page
Loading...
Need help?
General