COBHAM EXPLORER 8100 - Page 133

OpenAMIP setup for iDirect iNFINITI & Evolution
98-145510-E Appendix C: VSAT modem settings C-9
product_mode = dvbs2
upstream_product_mode = idirect_tdma
[POWER_MANAGEMENT]
enable = 0
sleep_timeout = 0
[ROUTE_1_0]
gateway = 0.0.0.0
interface = sat0
metric = 1
netmask = 0.0.0.0
network = 0.0.0.0
[RX1]
device_mode = scpc
device_name = rx1
device_path = /dev
[SAT0_1]
address = 10.0.0.13
netmask = 255.255.240.0
rip_enabled = 0
web_server_enabled = 0
[SATELLITE]
channelname = E36B
hunt_bandwidth = 0.000000
hunt_frequency = 1233.660000
longitude = 35.900000
max_lat = 0.000000
max_skew = 90.000000
min_look_angle = 0.000000
name = E36B
noise_reference_frequency = 0.000000
pol_skew = 0.000000
polarity = V
rx_lcl_osc = 11300.000000
skew_margin = 90.000000
tx_bandwidth = 0.000000
tx_frequency = 1234.560000
(Correct tx freq. ensures same P1dB @ all frequencies!)
tx_lcl_osc = 12800.000000
(BUC LO)
tx_polarity = X