98-145510-E E-1
Appendix E
System messages
E
This appendix has the following sections:
• Event messages – overview
• Lists of events
E.1 Event messages – overview
The EXPLORER VSAT system detects events during
• POST (Power On Self Test) – a self test performed at every power-up.
• PAST (Person Activated Self test) – started in the web interface
• CM (Continuous Monitoring) – automatically performed while the system is in
operation.
When the VSAT system detects an event that requires your action, it issues an event
message and the red Fail/Pass LED in the LED panel of the ACU is lit. As long as an event is
active, it is shown in the ACU display and the web interface (in HELPDESK > Event list or
click the event icon on the DASHBOARD).
State the Event ID when contacting your service partner.
The event description might contain a number of digits in brackets, e.g. (00000005). This is
supplemental information and used for service and diagnostics purposes.
Active events and notifications are shown. As soon as the event is cleared, it is not
displayed any longer. It is then moved to the Notifications section. Notifications
are cleared after 24 hours.
To Next Page
Loading...
