OpenAMIP setup for iDirect iNFINITI & Evolution
98-145510-E Appendix C: VSAT modem settings C-14
Note 1: Connect to modem with Telnet or serial and issue the following commands:
options show ANTENNA
Check: IP address, port # and manufacturer = OpenAMIP.
options show MOBILE
Check: is_mobile = 1
Note 2: Connect to modem with telnet and issue command:
options show SATELLITE
Check: tx_lcl_osc = 12800.000000,
Check: tx_frequency is between: 950.000000 to 1700.000000
Check: rx_lcl_osc + hunt_frequency is between: 10.7 GHz to 12.75 GHz
Figure 11: iDirect OpenAMIP troubleshooting
* Use same transponder polarity with both calibrations.
To Next Page
Loading...
