98-141368-A 6
Chapter 2
Installation
2
This chapter describes how to install the SAILOR Fleet One antenna and the SAILOR Fleet One
terminal. It has the following sections:
• Unpack your SAILOR Fleet One
• Mounting considerations for the antenna
• Antenna mast design
• Install the antenna
• Mounting considerations for the terminal
• Install the terminal
• Connect cables
• Power cable selection
Unpack your SAILOR Fleet One
Unpack your SAILOR Fleet One system and check that the following items are present:
• SAILOR Fleet One terminal
• SAILOR Fleet One antenna
•DC power cable (1 m)
• Antenna cable (10 m)
• Ethernet cable (2 m)
• I/O connector
• Mounting bolts and washers for the antenna
• Kit for water protection of antenna connector joint
• Installation guide
•Quick guide
• CD with Installation guide, Quick guide and User & installation manual
• Optional: IP Handset
Inspect all units and parts for possible transport damage.