Chapter 4: Operation
98-141368-A 51
The built-in web interface
The SAILOR Fleet One terminal has a built-in web interface, which is used for operating and
configuring the SAILOR Fleet One system.
To access and navigate the web interface
To access the web interface
To access the web interface, do as follows:
1. Connect your computer to the terminal.
2. Start up the terminal.
For details, see Start up the SAILOR Fleet One on page 37.
3. Open your browser and enter http://ut.bgan or the IP address of the terminal in the
address bar.
If your connected computer is set up to obtain a DNS server address automatically, this
name is translated into the local IP address of the terminal. The default IP address of the
terminal is http://192.168.0.1.
The web interface opens with the Dashboard, or, if the SAILOR Fleet One terminal is waiting for
a PIN, it prompts you to enter the PIN (see SIM PIN on page 63.)
The Proxy server settings must be disabled in your browser before accessing the web
interface. Most browsers support disabling of the Proxy server settings for one
specific IP address, so you can disable Proxy server settings for the web interface
only, if you wish. Consult your browser help for information.
To Next Page
Loading...