Chapter 2: Installation
98-141368-A 21
Connect cables
The connector panel
The connector panel has the following connectors:
• 1 Antenna connector (TNC)
• 1 Phone connector
• 2 LAN connectors with Power over Ethernet (PoE)
• 1 DC power input connector for connection to 10.5-32 V DC, with optional remote on/off
• 1 Input/Output connector with 5 inputs/outputs for external control or signalling
• 1 ground stud with wing nut
For information on how to connect to a specific interface, see the next sections.
To Next Page
Loading...