Chapter 5: Configuration
98-141368-A 86
2. Select Enabled to enable the use of this external data connection.
If you select Disabled, this data connection cannot be used.
3. If you have installed a data connection switch, select Yes or No next to I/O control.
• Select Yes if you want this external data connection to follow the setting of the data
control switch, that is when the data control switch disables data, this external data
connection is also disabled.
• Select No if you want this external data connection to be independent of the data
control switch.
For details on the use of a data connection switch, see To connect the data connection
status kit (optional) on page 32.
4. Type in the MAC address of the equipment used for the external data connection.
The data connection is now locked to this MAC address and cannot be used with any other
equipment.
5. Click Apply.
To Next Page
Loading...