Sea Tel Tracker 6000 Stowing the Antenna
10. Assure that all personnel in the area are
aware that the Service Brackets are being
removed.
11. Remove the mounting hardware from the
Service Brackets while maintaining control
of the mechanism.
12. Store the Service Brackets, and the
mounting hardware, in a secure location
where they can be used again whenever
the antenna is being stowed
(immobilized).
13. Assure that the ODU/Antenna is ready to be energized.
14. If power to the ODU was “tagged out”, remove the tag from the breaker that supplies
power to the ODU.
15. If power to the Antenna from the Circuit Breaker Box was “tagged out”, remove the tag
from the breaker that supplies power to the Antenna.
16. When all nearby personnel are ready, turn power breaker ON.
17. Start, or return to, normal service.
6‐2
EAR Controlled - ECCN EAR99
To Next Page
Loading...
Need help?
General