Tracker 6000 Technical Specifications
Sea Tel Tracker 6000
7.
Tracker 6000 Technical Specifications
The technical specifications for your Series Above Decks Equipment subsystems are listed below: Refer to
your ACU manual for its’ Specifications.
7.1.
Out Door Unit (ODU)
System Wei
ht (ADE)
Wei
ht 2732.2 k
(6023.8 lbs) with 8 m Radome
Stabilized
ntenna Pedestal Assembly
ype
hree-axis (Level, Cross Level and Azimuth)
Pointin
orque Mode Servo
Azimuth, Level, Cross Level Motors
Size 34 FOV Controlled Step motors operating in
or
ue Mode
Inertial Reference 3 Axsis Solid State Rate Sensors
Gravity Reference 3 Axzis Solid State Accelerometers
AZ transducer 16 Bit Absolute Encoder
Pointin
Accuracy (Open Loop) 0.5 de
rees
Pointin
Accuracy (Closed Loop) 0.05 de
rees (0.02 de
rees Typ)
Pedestal Ran
e of Motion:
Elevation Joint An
le 0 to + 180 de
rees
Cross Level +/- 15 de
rees
Azimuth 700 De
rees (+/- 270 nominal
Elevation Pointin
5 to + 175 de
rees
rackin
modes Dishscan (Autotrack), Pro
ram Track (TLE, ECEF)
ntenna Reflecto
ype Prime Focus, Parabola (1 Hub & 8 Petals)
Diameter 6 M (146 in)
Frequency T
5.091 - 5.24912 GHz
Frequency RX 6.875-7.055 GHz
Size 6 m (19.685 ft)
Gain
X 47.3 dB
Gain RX 49.4 dB
Pattern Mas
FCC 25.209
Mask start point 1.5 de
rees
Axial 25 de
rees
G/
C- band 12 dBk / 24 dBk
7‐1
EAR Controlled - ECCN EAR99