Cochlear Nucleus CP810 - When Using the Litewear, Your Processor Does Not Work; Your Processor Does Not Automatically Detect an Audio Accessory

When using the LiteWear, your processor does not work
Suggested actions:
Step 1: Check that the battery module and the LiteWear cable are
properly aligned/connected.
Try turning on your processor again.
If this solved the problem, you're done. If not, continue.
Step 2: Complete the steps described in Perform a maintenance
check.
Try turning on your processor again.
If this solved the problem, you're done. If not, continue.
Step 3: Contact your clinician.
Your processor does not automatically detect an audio
accessory
Suggested actions:
Step 1: Check that the accessory cable is fully inserted into
the accessory socket on the processing unit, and to the
accessory.
If this solved the problem, you're done. If not, continue.
Step 2: Try manually enabling the accessory.
Simple option Advanced option
Press the upper button. Press and hold the upper
button.
If this solved the problem, you're done. If not, continue.
Step 3: Contact your clinician.
28 - CP810 and CR110 Troubleshooting Guide © Cochlear Limited 2010
Troubleshoot your processor