EasyManua.ls Logo

Cochlear Nucleus CP810 - Coil Has Disconnected from the Implant

Cochlear Nucleus CP810
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Coil has disconnected from the implant
The coil is no longer picking up a signal from the
implant. This alert could mean that:
The • coil has fallen off your head.
There may be a • fault with the coil or coil
cable.
Suggested actions:
Step 1: Place the coil back on your head.
Make sure the coil magnet is properly positioned over the
implant.
If the coil falls off your head often, try:
• Adjusting the magnet depth, or
Changing to a stronger magnet.•
If this solved the problem, youre done. If not, continue.
Step 2: Check both the coil and the coil cable as described in
Perform a maintenance check.
If this solved the problem, youre done. If not, continue.
Step 3: Contact your clinician.
14 - CP810 and CR110 Troubleshooting Guide © Cochlear Limited 2010
Use your remote assistant to troubleshoot your processor

Table of Contents

Other manuals for Cochlear Nucleus CP810

Related product manuals