Introduction
From time to time, you may need to troubleshoot your Cochlear
™
Nucleus
®
CP810 Sound Processor or your Cochlear
™
Nucleus
®
CR110
Remote Assistant.
This guide explains how to:
• Perform a maintenance check.
Use your remote assistant to troubleshoot your processor.•
Troubleshoot your processor or remote assistant step-by-step.•
Keep the following guides close at hand:
CP810 Sound Processor User Guide•
CR110 Remote Assistant User Guide•
Perform a maintenance check
Performing a maintenance check before troubleshooting can make it
quicker and easier for you to find the cause of your problem.
To perform a maintenance check:
1. Inspect the components.
See Inspect the components in this guide.
2. Confirm that your processor is receiving sound.
See Confirm that your processor is receiving sound in this guide.
3. Check for alerts or errors:
If you have a remote assistant, turn it on and check the screen for
visual alerts. Also check your processor battery status.
If you do not have a remote assistant, check your processor
indicator light for alerts or errors.
© Cochlear Limited 2010 CP810 and CR110 Troubleshooting Guide - 5
To Next Page
Loading...
