How to check for sound using the Monitor
Earphones
Processor connector (1) and accessory connector (2) Figure 2:
on Monitor Earphones
A hearing person can use the Monitor Earphones to detect a signal from
the microphones, the telecoil or an accessory.
The Monitor Earphones do not assess signal quality or represent the
processed sound a recipient hears.
Step Actions
Step 1:
To test that your processor is receiving sound:
Make sure your processor is on.•
Make sure you are in an environment that has sound •
which is loud enough to hear.
Lift the accessory socket cover of your processor and •
plug the monitor earphones into the accessory socket.
Listen to sounds.•
Step 2:
To test an accessory:
Ensure that you can hear sound through the monitor •
earphones.
Plug the accessory into the accessory connector on •
the monitor earphones.
Listen to sounds.•
2
1
To Next Page
Loading...
